Conventional Fire Alarm

HFP-CP-4
Zones: 4 detection zones.
Compatibility: 100% compatible with the Hochiki conventional product range.
Installation: Surface-mounted, user-friendly, with easy, removable chassis for installation.
Power Requirements: Requires 2 x 12V / 2Ah or 2.1Ah batteries for backup.
Functionality: Offers robust "cause and effect" programming and can be used with repeater panels (HFP CP-R).
Options: Sometimes referred to as HFP CP-4TS or HFP CP-4KS. 

BEL-SBDB
Robust Design
Low Current Consumption
Easy to Install
Xenon Beacon Technology
Deep Base Provides IP66 Protection
Maximum 110 dB (A) @ 1 Meter
32 User Selectable Tones and 3 User Volumes

CCP-E

Operating Voltage: Typically ranges between 15 – 30 VDC.
Nominal Operating Resistance: Set at 470 Ω.
Maximum Contact Resistance: Rated at 200 Ω.
Ingress Protection: Rated at IP24 (indoor use).
Operating Temperature: Ranges from -10 °C to +55 °C (some documentation lists up to +50 °C).
Maximum Humidity: Operates in up to 95% RH non-condensing (at 40 °C).
Wiring Terminals: Push-fit terminals accommodate solid conductors up to 2.5 mm².

DCD-CE3
Operating Voltage: 9.5 – 30 V DC, allowing it to be installed on both fire and security systems.
Quiescent Current: 35 µA (typical).
Alarm Current: 40 mA (maximum).
Operating Temperature: -10°C to +50°C.
IP Rating: IP63.
Dimensions: 100mm diameter x 38mm height; weight of 76g.

MBF-6EV

Sound Output: Typically produces 95–96.5 dB(A) at a distance of 1 meter.
Operating Voltage: Functions within a range of 20.4 – 27.6 Vdc.
Current Consumption: Features an extremely low current draw, rated at approximately 11mA.
Environmental Rating: Carries an IP23C ingress protection rating, making it suitable for indoor environments.

SOC-24V

Photoelectric Chamber: Features a computer-designed, non-directional smoke chamber for highly stable operation and high-quality detection.
360° Visual Indicator: A bi-colored LED provides a full 360° view of the detector's status: green for normal standby, flashing red for sensitivity drift, and steady red for alarm.
Automatic Sensitivity Testing: Includes a built-in verification function that meets NFPA 72 requirements for inspection and maintenance.
Flexible Compatibility: Compatible with 2-wire or 4-wire bases (such as the NS-4 and NS-6 series) and can be used in open areas or in-duct applications.