Skip to Content

JBL

JBL 8124 White Ceiling Speaker 6 Watt
8124

Driver Type: 4-inch (100 mm) full-range driver.
Power Handling: 6W transformer taps at 6W, 3W, and 1.5W (plus 0.75W at 70V only).
Frequency Range: 60 Hz to 18 kHz (-10 dB).
Sensitivity: 93 dB (1W, 1m), ensuring high sound levels even with minimal amplifier power.
Nominal Impedance: 8 ohms.
Coverage: Wide 130° conical coverage for even sound distribution
2,908.00 LE 2908.0 EGP
JBL Control 14C/T White Ceiling Speaker 30 Watt
Control 14C/T

Power Handling: Rated at 30 Watts continuous pink noise and 60 Watts continuous program power at its 8Ω nominal setting.
Frequency Response: Operates across a bandwidth of 74 Hz – 20 kHz (-10 dB).
Sensitivity: Nominal sensitivity of 87 dB, with a maximum peak SPL of 108 dB.
Coverage: Features a 120° conical coverage pattern, which helps reduce the total number of speakers needed for even sound distribution.
7,832.00 LE 7832.0 EGP
JBL Control 88M Garden 8inch Speaker 60 Watt
Control 88M

Drivers: 200 mm (8.0 in) low-frequency driver with a polypropylene cone and a 25 mm (1.0 in) polyetherimide (PEI) dome tweeter.
Power Handling: 120W Continuous Pink Noise (240W Continuous Program) at 8Ω.
Transformer Taps:
70V: 60W, 30W, 15W, and 7.5W.
100V: 60W, 30W, and 15W.
Frequency Range: 47 Hz – 16 kHz (-10 dB).
Coverage: 360° horizontal and 160° vertical.
Durability: IP-55 (some sources cite IP-56) rated for dust and water resistance, exceeding MilSpec 810 for humidity and salt spray.
CALL US 0.0 EGP
JBL NVMA160-34-EU Mixing Amplifier 60W
NVMA160-34-EU

Output Power: 60W RMS.
Load Support: Compatible with low impedance (4Ω or 8Ω) and high impedance (70V and 100V) systems.
Frequency Response: 20Hz – 20kHz (±2dB) for 4/8Ω loads; 80Hz – 15kHz (±3dB) for 70V/100V outputs.
Total Harmonic Distortion (THD): Less than 0.5% at the power amp output.
Signal-to-Noise Ratio: Greater than 76dB.
28,671.00 LE 28671.0 EGP
JBL VMA1240 Mixing Amplifier 240W
VMA1240
Multi-Source Mixing: Features a 5-input mixer with one output channel, allowing for flexible routing of various audio sources.
Integrated Media Player: Includes a built-in player that supports MP3 playback via a front-panel USB Type-A port or wireless Bluetooth streaming.
Commercial Controls: Equipped with independent bass and treble controls for the output channel (+/- 14dB) and voice-activated (VOX) ducking to automatically lower music volume during announcements.
Remote Capability: Supports remote volume control using an optional JBL CSR-V module connected via standard Cat5e Ethernet cable.
DIP Switch Configuration: Allows for easy hardware-level configuration of settings such as mic/line selection, 27V phantom power, and paging chimes.
CALL US 0.0 EGP
JBL VMA2120 Mixing Amplifier 120W 2CH
VMA2120

Power Output: Delivers 120W per channel (2 channels total) into 4 or 8 Ohm loads, or distributed 70V/100V systems.
Integrated Media Player: Supports wireless audio streaming via Bluetooth and direct MP3 playback through a front-panel USB Type-A port.
Input Options: Features 8 input channels with diverse connectors including Euroblock (Phoenix), RCA, and 1/4" TRS jacks.
Voice-Activated Ducking (VOX): Automatically lowers background music volume during announcements on specific channels (Inputs 2 and 5).
Independent Tone Controls: Provides per-channel Bass and Treble adjustments (+/-14dB) to tailor sound for different zones.
CALL US 0.0 EGP